Linux sysctl.conf for higher load systems

Unix

24 Mar 2015

Linux sysctl.conf for higher load systems

Preston Garrison 0 Comments

Here is the current sysctl.conf I am using for my linux systems.  You can apply this with out rebooting by typing sysctl -p

 

# /etc/sysctl.conf
# Increase system file descriptor limit
fs.file-max = 100000

# Discourage Linux from swapping idle processes to disk (default = 60)
vm.swappiness = 10

# Increase ephermeral IP ports
net.ipv4.ip_local_port_range = 12000 65000

# Increase Linux autotuning TCP buffer limits
# Set max to 16MB for 1GE and 32M (33554432) or 54M (56623104) for 10GE
# Don't set tcp_mem itself! Let the kernel scale it based on RAM.
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216
net.core.rmem_default = 16777216
net.core.wmem_default = 16777216
net.core.optmem_max = 40960
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216

# Make room for more TIME_WAIT sockets due to more clients,
# and allow them to be reused if we run out of sockets
# Also increase the max packet backlog
net.core.netdev_max_backlog = 50000
net.ipv4.tcp_max_syn_backlog = 30000
net.ipv4.tcp_max_tw_buckets = 2000000
net.ipv4.tcp_tw_reuse = 1

#caution
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_syncookies = 1


net.ipv4.tcp_fin_timeout = 10

# Disable TCP slow start on idle connections
net.ipv4.tcp_slow_start_after_idle = 0

# If your servers talk UDP, also up these limits
net.ipv4.udp_rmem_min = 8192
net.ipv4.udp_wmem_min = 8192

# Disable source routing and redirects
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.all.accept_source_route = 0

# Log packets with impossible addresses for security
net.ipv4.conf.all.log_martians = 1

net.core.somaxconn  = 4096

 

_

Preston Garrison